Cyklone CY/LCY
Product Features
- Easy mounting
- Wide range of equipment
- Inlet is placed in the left side
- High pressure cyclones for high pressure connections
- Cyclones for very light particles
- Dust container outlet equipment for continuous outlet
Product Highlights
-
Connection
-
Dust container
-
Bulk bag
-
JKF-flange
Cyclone type LCY 160 incl. 150L dust container
Further data
For the separation of certain material types/chips at larger material volumes you can advantageously use a cycklone as pre-separator.
Through coarse separation by cyclone the filter material load is reduced, whereby the operating costs are reduced.
Gram cyclones are available in 3 models:
CY | Air volume: | 500 - 30,000m³/h |
Vacuum: | Up to 5,000Pa | |
Rise velocity (immersion tube): | Approx. 20m/s | |
Intended for low pressure | ||
CY-V | Air volume: | 1,000 - 8,000m³/h |
Vacuum: | Up to 40,000Pa | |
Rise velocity (immersion tube): | Approx. 20m/s | |
Intended for high pressure | ||
LCY | Air volume: | 1,500 - 7,000m³/h |
Vacuum: | Up to 5,000Pa | |
Rise velocity (immersion tube). | Approx. 1.5m/s | |
Intended for lighter materials by speed reduction |
Cyclone type CY 500 - 1500 incl. 40L dust container
Dust/particle collection can take place by dust container (40-150L) or sack rack (380L).
At larger material volumes the cyclone can be place on a under frame and equipped with equipment for pressureless outlet to bulk bag.
For simple connection to high-vacuum dust the inlet and outlet are equipped with JKF-flanges.
Filter cabinet is made in 2mm black steel plate and subsequently powder enamelled.
Is available in hot-galvanized, enamelled steel plates for outdoor mounting.
Is available in explosion-protected/-reliefed version for application in ATEX-zones.
Futher is available:
- Lockable inspection cover below on the cyclone side.
- Sack insert for 72L-dust container
- 380L-sack rack
- Under frame and connections for bulk bag and drop pipe for customer specific containers, see brochure page
- Under frame for extension of bulk bag, shielded with door and micro-switch
- Temperature sensor type RT101 as well as signal devices
- Fill-level sensor type OEM-K
Principle sketch
Documents
Some of the documents require login. Order your login here.
Login to access the documents.
Login to access the documents.