Extraction arm RGF-A

Extraction arm type RGF-A for application in ATEX-zone 21/1 (2D/2G). Suction arm for welding and soldering smoke, dust, aerosoles and fumes. Wide movement pattern, can revolve 360°.

Arm made with earth cable for earthing after mounting. Tested for electrical resistance. Hood with damper and fabrik rubber. Hose brackets in plastic. Special hose for ATEX-zone 21/1.

Product Features

Very easy-to-move suction arm with wall fittings
Wide movement pattern
RGF-A can rotate freely with reliefed hose
Supplied with wall fittings
Flow technical optimized hood
External bar system provides better flow and less wear
Length 2-4m are connected with nipple to channel
Length 5-9m are connected with hose to channel

Product Highlights

Wall fittings with earth cable

Wall fittings
Joint with earth cable for parallelogram

Bend
Intermediate plates at top joint with relief cables

Joint
Hood additional joint and external arm connected with earth cables

Hood

Further data

Extraction arm made in robust powder enamelled steel construction.
Very easy-to-move suction arm with wide movement pattern, can rotate freely 360°.
Equipped with wall fittings with self-lubricating revolving joint.
Fan can be mounted directly on this extraction arm.
RGF-A are available in the following hose diameters: ø100, ø125, ø160mm, and ranges from 2-9m.
RGF-A 4000E and RGF-A 5000 are delivered with extension arm/single swing arm.
RGF-A 6000/7000/8000/9000 are delivered with extension arms/double swing arm that can be folded totally against the wall.
The RGF-A-arm is constructed with external bar system.
This reduces wear, increased air flow and makes service and adjustment.

Joints, hood and hose are all earthed!