Oil mist separator type OUPC 2000 - 4040
Product Features
- The polluted air is led into the bottom of the separator to the separation chamber for air distribution and densification
- The accumulated particles are led on to the washable pore filter PPi35 (50% higher efficiency than alu-grease filter)
- Then the air is fine-filtered in cartridge filter type G104A. Separation degree >99% of particles above 0.1µm
- Below the first two filter stages a fluid reservoir with ½”-drain cock is located
- Last filter stage is a HEPA-filter, filter class H13 that ensures removal of >99.95% smoke particles down to 0.1µm
Product Highlights
-
Pre-filter
-
Integrated fan
-
DIN-cartridge
-
Differential pressure control
Capacities
Air volume 2000 / 2020: | Up to 2,000m³/h |
Air volume 4000 / 4040: | Up to 4,000m³/h |
All-round unit with low operating costs
The 4-stage separator principle in OUPC ensures the optimale filtration solution, regardless the type of cooling lubricants, since every filter stage represents the optimale filter principle for each of the primary types of mists: oil mist, emulsion mist, minimal quantity lubrication and oil smoke.
The large surface of the washable pre-filter and self-draining filter cartridge ensure long service life and low pressure loss, which minimize costs for energy and filter replacements. The high separation degree of the third filter stage ensures very long life.
Compact and space-saving solution
The vertical construction of OUPC 2000 – 4040 provides an especially compact and space-saving filter solution for floor mounting. With integrated fan the piping on the clean air side is also saved (where recirculation is permitted).
Advantages by removal of oil mists directly at the machine
- The hazardous effects on breathing and skin are reduced.
- Fire risk as well as the risk of oil mist aerosols damaging electronics in the machines are minimized.
Filter material: |
||
Standard | Material | Filtration efficiency |
Pre-separation in grease filter | Pore filter 35 open-celled polyurethane foam (washable) |
Separated normally up to 30% of particles |
Fine filtration in self-draining cartridge filter |
Cartridge filter ø325mm, length 330/660mm, G104A polyester/glassfibre |
Separated more than 99% of particles over 0.1µm |
Fine filtration through HEPA- absolute filter |
HS-Mikro SFV High Effeciency Particular Air filter, microfilter (glassfibre) mounted in metal frame |
> 99,95% equal to filter class H13 according to DS EN1822 |
Pressure lost over the individual filter stages
Principle sketch for flow through oil mist separator type OUPC 4040
Construction/surfaceoverflade:
Oil mist separator type OUPC is constructed according to:
- Machine Directive 2006/42/EF
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- Harmonized standards: EN 13854, EN 4414, EN 12100, EN 60204-1, EN ISO 13857
- Further standards: ISO 3746
Filter cabinet is made in 2mm black steel plate
Surface powder enamelled RAL 7042/7011 structure
Further is available
- Siphon for drain cock
Oil mist filter type OUPC is available in the sizes as stated in the form below.
Please, contact us for assistance in selecting the optimal unit taking into consideration air volume, type and vo-lume of cooling lubricant, operation times etc.
Oil mist separator type OUPC 2000 - 4000
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 pc. Minihelic-differential pressure manometer 0-3kPa (09 500 000) and 2 pcs Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)
Oil mist separator type OUPC 2020 - 4040
Unit is in top equipped with a fan type VR, 3x400 VAC, 50Hz, 2800 rpm. The fan type is equipped with closed fan wheel and backward-curved straight self-cleaning blades, static/dynamic balanced according to ISO 14694 (BV3 G 6,3).
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 stk. Minihelic-differential pressure manometer 0-3kPa (09 500 000) og 2 stk Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)
Motor data:
Motor data > 0.75kW, 3x400V, according to IE3-motors.
Oil mist separator type OUPC 2000
Oil mist separator type OUPC 2020
Oil mist separator type OUPC 4000
Oil mist separator type OUPC 4040
Documents
Some of the documents require login. Order your login here.
Login to access the documents.
Login to access the documents.
Login to access the documents.