ATEX extraction arms

For use in ATEX Zones, where static electricity and explosion hazards must be taken into account, Gram point extraction arms is supplied in ATEX execution.

The range consists of flexible extraction arms from 1 to 9m range and diameters ø80 - ø160mm as well as pivotal hoods with diameter ø200mm.

Ved du ikke hvad du skal bruge? Så kontakt vores salgsteam som står klar til at hjælpe dig.

+45 74 52 30 75

Extraction arm LGF-A

Extraction type LGF-A for application in ATEX-zones 21/1 (2D/2G). Suitable for the extraction welding and soldering smoke, dust, aerosoles and fumes. Range 1-9 m.
  • Extraction arm with fittings for wall
  • External bar system provides better flow and less wear
  • Flow-technical optimized hood
  • LGF-A has direct hose connection to channel
  • LGF-A 1-1.5m are delivered with combined table/wall fitting
  • LGF-A 2-9m are delivered with wall fittings
Brochures
Instructions

Login to access the documents.

Pictures

Login to access the documents.

Extraction arm RGF-A

Extraction arm type RGF-A for application in ATEX-zone 21/1 (2D/2G). Suction arm for welding and soldering smoke, dust, aerosoles and fumes. Wide movement pattern, can revolve 360°.
  • Very easy-to-move suction arm with wall fittings
  • Wide movement pattern
  • RGF-A can rotate freely with reliefed hose
  • Supplied with wall fittings
  • Flow technical optimized hood
  • External bar system provides better flow and less wear
  • Length 2-4m are connected with nipple to channel
  • Length 5-9m are connected with hose to channel
Brochures
Instructions

Login to access the documents.

Pictures

Login to access the documents.

Extraction arm RFF-A

Extraction arm type RFF-A for application in ATEX-zone 21/1 (2D/2G). For welding and soldering smoke, dust, aerosoles and fumes. With powder enamelled steel pipes, can rotate freely 360°.
  • Fixed-mounted, enamelled steel pipe for optimal flow and design
  • Easy-to-move suction arm with wide movement pattern
  • RFF-A can rotate freely 360° with reliefed hose
  • External bar system provides better flow and less wear
  • Flow technical optimized hood
  • Wall fittings wiht maintenance-free rotation joint
  • Length 2-4m is connected with nipple to channel
  • Length 5-9m is connected with hose to channel
Brochures
Instructions

Login to access the documents.

Pictures

Login to access the documents.

Pivotal hood LE-A

Strong pivotal hood type LE-A 2000-6000 for ATEX-zone 21/1 (2D/2G). Especially suitable for extraction of grinding dust, welding smoke as well as from larger areas.
  • For ATEX-zone 21/1
  • Wall fittings
  • Total length 2-6m
  • Carrying capacity up to 35kg (in rotation joint)
  • Standard hood can tilt, rotate and is self-supporting
  • Standard hood made in aluminium with proctection edges
  • Measurement standard hood: 300x1500mm with edge extraction
  • Direct hose connection to channel
Brochures
Instructions

Login to access the documents.

Pictures

Login to access the documents.

Drawings

Login to access the documents.