Oil mist separator type OUPC 2000 - 4040
Decentralized oil mist filter for extraction from processing machines. The 4 filter stages ensure optimized filtration from oil smoke to oil mists. Oil mist separator can be placed close to the processing machine with larger air volume requirements. Separation degree min. 99.95% of all cooling lubricants.
- The polluted air is led into the bottom of the separator to the separation chamber for air distribution and densification
- The accumulated particles are led on to the washable pore filter PPi35 (50% higher efficiency than alu-grease filter)
- Then the air is fine-filtered in cartridge filter type G104A. Separation degree >99% of particles above 0.1µm
- Below the first two filter stages a fluid reservoir with ½”-drain cock is located
- Last filter stage is a HEPA-filter, filter class H13 that ensures removal of >99.95% smoke particles down to 0.1µm
The 4-stage separator principle in OUPC ensures the optimale filtration solution, regardless the type of cooling lubricants, since every filter stage represents the optimale filter principle for each of the primary types of mists: oil mist, emulsion mist, minimal quantity lubrication and oil smoke.
The large surface of the washable pre-filter and self-draining filter cartridge ensure long service life and low pressure loss, which minimize costs for energy and filter replacements. The high separation degree of the third filter stage ensures very long life.
| Standard | Material | Filtration efficiency |
|---|---|---|
| Pre-separation in grease filter | Pore filter 35 open-celled polyurethane foam (washable) | Separated normally up to 30% of particles |
| Fine filtration in self-draining cartridge filter | Cartridge filter ø325mm, length 330/660mm, G104A polyester/glassfibre | Separated more than 99% of particles over 0.1µm |
| Fine filtration through HEPA- absolute filter | HS-Mikro SFV High Effeciency Particular Air filter, microfilter (glassfibre) mounted in metal frame | > 99,95% equal to filter class H13 according to DS EN1822 |
Oil mist separator type OUPC is constructed according to:
- Machine Directive 2006/42/EF
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- Harmonized standards: EN 13854, EN 4414, EN 12100, EN 60204-1, EN ISO 13857
- Further standards: ISO 3746
Filter cabinet is made in 2mm black steel plate
Surface powder enamelled RAL 7042/7011 structure
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 pc. Minihelic-differential pressure manometer 0-3kPa (09 500 000) and 2 pcs Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 stk. Minihelic-differential pressure manometer 0-3kPa (09 500 000) og 2 stk Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)
