Compact filter unit for cooling lubricants for mounting on top of metalcutting processing machines. The 4 separation stages of the filter ensure versatile application. Sepeation degree min. 99.95% of all cooling lubricant particles. Separated particles are led back to machine again if required.
The 4-stage separator principle in OUPC ensures the optimale filtration solution, regardless the type of cooling lubricants, since every filter stage represents the optimale filter principle for each of the primary types of mists: oil mist, emulsion mist, minimal quantity lubrication and oil smoke.
The large surface of the washable pre-filter and self-draining filter cartridge ensure long service life and low pressure loss, which minimize costs for energy and filter replacements. The high separation degree of the third filter stage ensures very long life.
The horisontal construction of OUPC 500 – 1010 provides an especially compact and space-saving filter solution for mounting directly on machining center due to height restrictions as a result of e.g. crane use over the machine. With integrated fan, the piping on the clean air side is also saved (where recirculation is permitted).
Standard | Material | Filtration efficiency |
---|---|---|
Pre-separation in grease filter | Pore filter 35 open-celled polyurethane foam (washable) | Separated normally up to 30% of particles |
Fine filtration in self-draining cartridge filter | Cartridge filter ø325mm, length 330/660mm, G104A polyester/glassfibre | Separated more than 99% of particles over 0.1µm |
Fine filtration through HEPA- absolute filter | HS-Mikro SFV High Effeciency Particular Air filter, microfilter (glassfibre) mounted in metal frame | > 99,95% equal to filter class H13 according to DS EN1822 |
Oil mist separator type OUPC is constructed according to:
Filter cabinet is made in 2mm black steel plate
Surface powder enamelled RAL 7042/7011 structure
Oil mist filter type OUPC is available in the sizes as stated in the form below.
Please, contact us for assistance in selecting the optimal unit taking into consideration air volume, type and vo-lume of cooling lubricant, operation times etc.
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x330mm, G104A (08 139 500)
3) DIN-cartridge ø325x660mm, G104A (08 139 510)
4) 1 pc. Minihelic-differential pressure manometer 0-3kPa (09 500 000) and 2 pcs Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
5) Absolute filter in MDF-frame, HEPA/H13, 457x457x78cm (08 176 050)
6) Absolute filter in MDF-frame, HEPA/H13, 457x457x292cm (08 176 075)
1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x330mm, G104A (08 139 500)
3) DIN-cartridge ø325x660mm, G104A (08 139 510)
4) 1 stk. Minihelic-differential pressure manometer 0-3kPa (09 500 000) og 2 stk Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
5) Absolute filter in MDF-frame, HEPA/H13, 457x457x78cm (08 176 050)
6) Absolute filter in MDF-frame, HEPA/H13, 457x457x292cm (08 176 075)